|
| MOQ: | 20 Metric Tons |
| Price: | Negotiable |
| Standard Packaging: | 25kg PP woven bag with inner waterproof PE film. |
| Delivery Period: | 15 days after be paid |
| Payment Method: | L/C, T/T, Western Union, MoneyGram |
| Supply Capacity: | 6000 Metric Ton/Metric Tons per Month |
25kg/bag Melamine Formaldehyde Moulding Compound For dinnerware tableware
1.Appearance: white powder, mono clinic crystal
2.MF: C3H6N6
3.CAS No.: 108-78-1
4.Purity:99.8% min
5.Packaging: inner polyethylene bag and outer woven bag, net weight per bag:
A:25kg, 22mt loading in 20fcl.
B:500kg and 1000kg PP bags,20mt loading in 20fcl.
6.Storage: Store in a cool and dry place and Keep away from strong light and heat
| Characteristics | Unit | High –end UFC | High-end MFC(new) | |||
| Density |
|
1.45-1.6 | 1.5-1.6 | |||
| Bulk density | g/1 | 650-800 | 700-850 | |||
| Shrink rate | % | 0.2-0.7 | 0.2-0.6 | |||
| Bending strength | N/mm2 | >80 | >80 | |||
| Impact strength | KJ/m2 | >7 | >7 | |||
| Notch impact strength | KJ/m2 | >1.5 | >1.5 | |||
| Hydroscopicity | mg | <300 | <200 | |||
| Martin heat resistance | ℃ | >100 | >120 | |||
| Dielectric strength | KV/cm | >80 | >120 | |||
| Surface resistance | (Comparison value) | >10 | >10 | |||
| Volume resistance | Ω.cm | >1011 | >1011 | |||
| Dielectric Dissipation Factor(100HZ) | (Tonδ) | <0.1 | ||||
| The track resistance | (KA) | >KA2a | >KA3b | |||
| Fire resistance | (Level) | >2a | >2a | |||
| Mobility | (compression molding) second | 9-15 | 9-15 |
7 Flowing mm 194 GB13454
8 Impact Strength(notch) KJ/m2,≥ 1.9 GB1043
9 Bending Strength Mpa,≥ 80 GB9341
10 Insulation Resistance after 24h in water MΩ≥ 105 GB1410
11 Dielectric strength MV/m,≥ 9 GB1408
Physical and chemical characteristics
Physical properties
Appearance: White, innoxious, flavorless crystalline powder.
Solubility: Soluble in methanol, formaldehyde, acetic acid, hot ethylene glycol, glycerol, pyridine; Slightly soluble in water, ethanol; Do not dissolve in ether, benzene and carbon tetrachloride. Weakly alkaline aqueous solution.
Chemical properties
Melamine presents alkalescence, can react with various acidums to generate melamine salt. In strong acid or strong alkali liquor, melamine will hydrolyze---amido group will be slowly replaced by hydroxyl, thus generate ammeline, Cyanuric Acid and Ammelide. It can react with aldehydes to produce addition compounds. Among them, the reaction of melamine and formalin is the most important part.
FAQ:
Q1. How can I get a sample to check your quality?
A: We are honored to provide the free sample for you, you just need to pay for the cost of freight.
Q2. Do you accept trial order?
A: Welcome sample order for a trial start,10kg, 20kg, 50kg, 100kg, or 1000kg as your requirement.
Q3: If the inspection result can not meet the agreement between the two sides, can you bear all the losses caused by this?
A: Yes, we can. We guarantee that the samples provided will meet the needs of our clients and we will bear the risk of default
Q4:Do you allow to visit your facotry and workshop?
A:Of course, we are very welcome that you could visit our factory. And we will arrange the professional Factory inspection and try the best to entertain guests.
Q5: How long is your delivery time?
A: Generally it is with 7 days if the goods are in stock. According to quantity your required,
the delivery time may slightly change.
Q6: What is your payment way?
A: We can accept TT. l/C DP. Western Union, paypal also welcome you place the order on Trade Assurance from alibaba directly.
Video
|
|
| MOQ: | 20 Metric Tons |
| Price: | Negotiable |
| Standard Packaging: | 25kg PP woven bag with inner waterproof PE film. |
| Delivery Period: | 15 days after be paid |
| Payment Method: | L/C, T/T, Western Union, MoneyGram |
| Supply Capacity: | 6000 Metric Ton/Metric Tons per Month |
25kg/bag Melamine Formaldehyde Moulding Compound For dinnerware tableware
1.Appearance: white powder, mono clinic crystal
2.MF: C3H6N6
3.CAS No.: 108-78-1
4.Purity:99.8% min
5.Packaging: inner polyethylene bag and outer woven bag, net weight per bag:
A:25kg, 22mt loading in 20fcl.
B:500kg and 1000kg PP bags,20mt loading in 20fcl.
6.Storage: Store in a cool and dry place and Keep away from strong light and heat
| Characteristics | Unit | High –end UFC | High-end MFC(new) | |||
| Density |
|
1.45-1.6 | 1.5-1.6 | |||
| Bulk density | g/1 | 650-800 | 700-850 | |||
| Shrink rate | % | 0.2-0.7 | 0.2-0.6 | |||
| Bending strength | N/mm2 | >80 | >80 | |||
| Impact strength | KJ/m2 | >7 | >7 | |||
| Notch impact strength | KJ/m2 | >1.5 | >1.5 | |||
| Hydroscopicity | mg | <300 | <200 | |||
| Martin heat resistance | ℃ | >100 | >120 | |||
| Dielectric strength | KV/cm | >80 | >120 | |||
| Surface resistance | (Comparison value) | >10 | >10 | |||
| Volume resistance | Ω.cm | >1011 | >1011 | |||
| Dielectric Dissipation Factor(100HZ) | (Tonδ) | <0.1 | ||||
| The track resistance | (KA) | >KA2a | >KA3b | |||
| Fire resistance | (Level) | >2a | >2a | |||
| Mobility | (compression molding) second | 9-15 | 9-15 |
7 Flowing mm 194 GB13454
8 Impact Strength(notch) KJ/m2,≥ 1.9 GB1043
9 Bending Strength Mpa,≥ 80 GB9341
10 Insulation Resistance after 24h in water MΩ≥ 105 GB1410
11 Dielectric strength MV/m,≥ 9 GB1408
Physical and chemical characteristics
Physical properties
Appearance: White, innoxious, flavorless crystalline powder.
Solubility: Soluble in methanol, formaldehyde, acetic acid, hot ethylene glycol, glycerol, pyridine; Slightly soluble in water, ethanol; Do not dissolve in ether, benzene and carbon tetrachloride. Weakly alkaline aqueous solution.
Chemical properties
Melamine presents alkalescence, can react with various acidums to generate melamine salt. In strong acid or strong alkali liquor, melamine will hydrolyze---amido group will be slowly replaced by hydroxyl, thus generate ammeline, Cyanuric Acid and Ammelide. It can react with aldehydes to produce addition compounds. Among them, the reaction of melamine and formalin is the most important part.
FAQ:
Q1. How can I get a sample to check your quality?
A: We are honored to provide the free sample for you, you just need to pay for the cost of freight.
Q2. Do you accept trial order?
A: Welcome sample order for a trial start,10kg, 20kg, 50kg, 100kg, or 1000kg as your requirement.
Q3: If the inspection result can not meet the agreement between the two sides, can you bear all the losses caused by this?
A: Yes, we can. We guarantee that the samples provided will meet the needs of our clients and we will bear the risk of default
Q4:Do you allow to visit your facotry and workshop?
A:Of course, we are very welcome that you could visit our factory. And we will arrange the professional Factory inspection and try the best to entertain guests.
Q5: How long is your delivery time?
A: Generally it is with 7 days if the goods are in stock. According to quantity your required,
the delivery time may slightly change.
Q6: What is your payment way?
A: We can accept TT. l/C DP. Western Union, paypal also welcome you place the order on Trade Assurance from alibaba directly.
