CAS 108-78-1 Melamine Moulding Compound Powder 99.8

Factory Price Molding Compound CAS 108-78-1 Melamine Moulding Powder 99.8

Product description

Melamine moulding compound, melamine and formaldehyde reaction of the polymer, also known as melamine resin, English abbreviation MF, processing and forming a crosslinking reaction, forming a linear structure, has a very high adhesive strength, products for thermosetting resin products, environmental protection, non-toxic, has good mechanical properties. Its products have the same pollution resistance as ceramics, beautiful appearance, so it is widely used in the processing of abrasive products for abrasive bonding. Melamine-formaldehyde resin can be heated at about 135℃ ~ 160℃ to solidify into an insoluble and non-melting solid, and the curing rate can be increased under acid catalysis

It can be heat resistant, aging resistance, arc resistance, chemical corrosion resistance, with good insulation performance, gloss, the product is as bright and clean as porcelain, and has the characteristics of light and not easy to break.

Feature:​

• Non-toxic, odorless.

• Smooth surface, substantial quality (pircelain like).

• Impack resistan, not easy to break.

• Low heat conductivity, easy to hand hold and liptouch.

• Dishwasher safe.

• Do not clean with steel ball.

Our main products:

Melamine resin content:

• A1: 30% MMC and 70% UMC
• A3: 50% MMC and 50% UMC
• A5:: 100% MMC
• LG110: Shinning A1, A3
• LG220: Shinning A5
• LG250/350: Brush decal paper

​

How to produce MELAMINE DINNERWARE with melamine moulding compound(MMC)?

1. Weighting the powder

• 2. Preheating the powder in oven to make into block
• 3. Puting the block on the molds, Pressing it under high temperature ( About 155-165 C ) and high pressure. 
• 4. Putting the glazing powder on simi-finished plates or trays.
• ( The usage of melamine glazing powder see our other products : melamine glazing powder LG220 )
• 5. After molding, polishing edge of melamine dinnerware
• 6. Testing
• 7. Packing.